Rison Titanium Lug Bolts — Conical Seat M14x1.5 x 28mm, Set of 20
Home / Wheel Accessories / Lug Bolts
Rison Titanium Lug Bolts — Conical Seat M14x1.5 x 28mm, Set of 20
Free US shipping on orders over $100.
Finish
Overview
Lighter wheels, starting at the bolt.
Rison machines these lug bolts from GR5 titanium (Ti-6Al-4V) with a 60° conical seat for aftermarket wheels. They're around 45% lighter than steel bolts, won't rust, and come as a full set of 20 with the 12-point socket to fit them.
Material
GR5 titanium.
Aerospace-grade Ti-6Al-4V with tensile strength over 900 MPa — strong, light and fully corrosion resistant.
Weight
About 45% lighter.
Twenty bolts' worth of unsprung, rotating weight off the car compared with steel.
Head
12-point, socket included.
A compact 12-point head takes a 17mm 12-point socket — and one comes in the set.
Finish
Five colors.
Raw titanium, or PVD-coated Burnt Blue, Gold, Black or Rainbow.
Fitment
Will it fit?
M14x1.5 thread with a 60° conical seat and 28mm of thread — for aftermarket wheels on VW and Audi.
By vehicle
VW / Audi with conical-seat aftermarket wheelsMK5–MK8 Golf / GTI / R · A3 / S3 / RS3 · M14x1.5Direct Fit
Check your wheel uses a 60° conical seat and that 28mm of thread suits your hub and any spacers.
Factory VW / Audi wheelsBall (radius) seatDoes Not Fit
OEM wheels need ball-seat bolts. Never use conical bolts on a ball-seat wheel.
Wheels with spacersOver ~5mmAsk Us
Thicker spacers need longer bolts than 28mm. Send us your spacer size first.
In The BoxWhat's included.
| Item | Supplied |
|---|---|
| Titanium conical seat lug bolts, M14x1.5 x 28mm | 20 |
| 17mm 12-point socket | 1 |
InstallHand-start, then torque.
Clean the threads
Clean the hub threads and the wheel seats. Apply nickel-based anti-seize to the bolt threads only — never copper, and nothing on the seat.
Hand-start every bolt
Thread each bolt in by hand. Don't use an impact gun on titanium.
Torque in a star pattern
Torque with a torque wrench in a star pattern. Rison rates these for 120–130 Nm — confirm the right figure with your wheel maker.
Re-check
Re-torque after the first 50 miles and check them at every wheel change.
SpecificationThe details.
Specs from Rison Titanium. Tensile strength over 900 MPa.
FAQQuestions, answered.
Will these fit my factory wheels?
No. Factory VW and Audi wheels use a ball (radius) seat. These are conical-seat bolts for aftermarket wheels.
How do I tell my wheel's seat type?
Look at the bolt holes: a cone-shaped taper is conical, a rounded cup is a ball seat. Most aftermarket wheels are conical — check with the wheel maker if unsure.
What torque should I use?
Rison rates these for 120–130 Nm, which is below VW's 140 Nm factory spec on MQB cars. Confirm with your wheel maker before installing.
Can I use an impact gun?
No. Hand-start every bolt and use a torque wrench.
Does it come with a socket?
Yes — a 17mm 12-point socket is included.
What's the return policy?
Uninstalled and in original packaging, returns fall under our standard refund policy. Get in touch before sending anything back.
Lighter on every corner
Rison Titanium Lug Bolts
M14x1.5 · 60° conical · Set of 20 · Five finishes