VW Jetta MK7/7.5 LED Front Emblem (19–25+)

Eurowerks
LED Front Emblem MK7 Jetta
SHIPS NEXT DAY OR DAY AFTER VIAUPS

MK7 / MK7.5 / MK7.75 Jetta · Exterior · LED Front Emblem

LED Front Emblem
MK7 / MK7.5 Jetta

Ultra-Slim ~7mm Profile · Full or Line Illumination

An ultra-slim (~7mm) illuminated front emblem engineered to replace the factory badge without sitting proud of the grille. Choose full or line illumination, then pick the plug-and-play LED grille connector or go connector-free if you're wiring it yourself.

⚠️ The pre-wired LED Grille Plug is only available for MK7.75 (25+) — MK7 and MK7.5 don't have that grille harness, so those years use the DIY wiring (No Connector) option. Clips may need to be trimmed and the emblem secured with glue or 3M VHB tape.
⚠️ Recommended connectors: a Posi-Tap Buy Posi-Tap connectors on Amazon or a Dorman 85038 T-Tap Buy Dorman 85038 T-Tap terminal at AutoZone — both are waterproof and weather sealed.
Emblem Style
Vehicle Year
Power Connector
$190.00Clips may need trimming for install
Questions?
Ultra-slim ~7mm
Full or line illumination
MK7–MK7.75 fitment
SHIPS NEXT DAY OR DAY AFTER VIAUPS

MK7 / MK7.5 / MK7.75 Jetta · LED Front Emblem

LED Front Emblem

⚠️ LED Grille Plug is only available for MK7.75 (25+) — MK7/MK7.5 use DIY wiring.
⚠️ Recommended connectors: a Posi-Tap Buy Posi-Tap connectors on Amazon or a Dorman 85038 T-Tap Buy Dorman 85038 T-Tap terminal at AutoZone — both are waterproof and weather sealed.
Emblem Style
Vehicle Year
Power Connector
$190.00Live price
Questions?

Installation

Wiring the No-Connector option.

Tapping the MK7 Jetta headlight harness with a tap connector for the LED emblem

If you went with the No Connector option, wiring in the emblem is straightforward — no need to cut into the factory harness.

  1. Locate the headlight harness behind the grille on the side you're installing.
  2. Find a switched 12V wire that only powers on with your headlights/parking lights.
  3. Clamp a Posi-Tap or Dorman 85038 T-Tap connector onto that wire and route the emblem's positive lead into the open side — both are waterproof and weather sealed, unlike standard Scotch-Lock taps.
  4. Crimp the tap closed, then run the ground lead to a clean chassis ground point.
  5. Test the emblem before final reassembly, then tuck and secure the wiring away from heat and moving parts.
⚠️ Verify wire polarity and switched status with a multimeter before tapping in — the wrong wire can pull power from the wrong circuit or blow a fuse.

Features

What you're getting.

ProfileUltra-Slim ~7mmEngineered to sit flush, like the factory badge — not proud of the grille
IlluminationFull or LineChoose a fully lit badge or a slimmer illuminated outline
ConnectorDIY, or LED Grille Plug (MK7.75)Wire it yourself on any year, or add the plug-and-play harness — MK7.75 (25+) only
WiringDIY · Posi-Tap InstallTaps the switched 12V wire — no cutting into the factory harness
FitmentMK7 / MK7.5 / MK7.75Model-year specific grille cutout and plug — select yours below
InstallGlue or 3M VHBClips may need trimming; secure with adhesive during install

Reviews

Nino★★★★★

Looks good on the jetty

Customer photo of LED front emblem installed on MK7 Jetta Customer photo of LED front emblem installed on MK7 Jetta

Fitment

Will it fit?

Model Years Fitment
VW Jetta MK7 2019–2021 Direct Fit
VW Jetta MK7.5 2022–2024 Direct Fit
VW Jetta MK7.75 2025+ Direct Fit

Ready to light it up?

LED Front Emblem
MK7 Jetta

Ultra-Slim Profile · Full or Line Illumination · Plug-and-Play or DIY Connector

From$190.00
Questions?
VW Jetta MK7/7.5 LED Front Emblem (19–25+)
$220.00 $190.00

Customer Reviews

Loading reviews…