034Motorsport Flush Wheel Spacer Kit — 10mm & 15mm | VW & Audi 5x112 (57.1mm)
Home / Wheel Accessories / Wheel Spacers
034Motorsport Flush Wheel Spacer Kit — 10mm & 15mm
6061 BilletBlack Anodized5x112 · 57.1mm4 Spacers
034Motorsport · Staggered 10mm front / 15mm rear · Set of 4
$197.00
4 spacers · Shipping calculated at checkout.
1
Hub centric
Set of 4
Free shipping over $100
Home / Wheel Accessories / Wheel Spacers
034Motorsport Flush Wheel Spacer Kit — 10mm & 15mm
6061 BilletBlack Anodized5x112 · 57.1mm4 Spacers
$197.00
4 spacers · Shipping calculated at checkout.
1
Overview
Two pairs. One flush stance.
⚠️ Bolts are not included — 37mm front / 42–45mm rear. Your factory bolts are too short once a spacer is in the stack.
⚠️ Hubcentric rings won't work with these.
Why
The spacers pilot directly on the 57.1mm hub. If your wheels currently run reducer rings for a larger bore, this pairing isn't the right one for your setup.
⚠️ Check your wheel's bore chamfer before ordering. Measure yours first — spacers can't be returned once they've been fitted.
Why
The 10mm spacers need at least a 6.25mm chamfer on the wheel's centre bore, with the outer edge of that chamfer measuring 70mm minimum. Most OEM VW/Audi wheels clear this comfortably; some aftermarket wheels don't.
Maintenance & UpkeepRe-torque all four corners to 120 Nm after the first 50–100 miles.
Features
Machined, not cast.
Material6061 Billet AluminiumMachined from solid billet, not cast or pressed
FinishBlack AnodizedCorrosion resistant and disappears behind the wheel spokes
WeightMilled Relief PocketsThe back face is pocketed out to pull unsprung rotating weight
RemovalEasy-Release GroovesMachined grooves let you break the spacer free without a pry bar on the hub
Pattern5x112 · 57.1mm BorePilots on the hub — no reducer rings, no bolt-centred guesswork
InstallBolt-On, ReversibleNo drilling, no modification, no coding — comes back off in an afternoon
Fitment
Will it fit?
| Platform | Layout | Fitment |
|---|---|---|
| MK5 Golf / GTI / R32 | 10mm F / 15mm R | Direct Fit |
| MK6 Golf / GTI / R | 10mm F / 15mm R | Direct Fit |
| MK6 Jetta / GLI | 10mm F / 15mm R | Direct Fit |
| MK7 / MK7.5 GTI / R | 10mm F / 15mm R | Direct Fit |
| MK7 / MK7.5 Jetta / GLI | 10mm F / 15mm R | Direct Fit |
| MK8 / MK8.5 GTI / R | 10mm F / 15mm R | Direct Fit |
| Audi A3 / S3 / RS3 (8V & 8Y) | 10mm F / 15mm R | Direct Fit |
| MK3 Tiguan | 10mm F / 15mm R | Direct Fit |
| Lowered / aftermarket wheels | Varies | Ask Us First |
Bore matters, not just bolt pattern. These are 57.1mm. The B8 and B9 Audi A4/S4 platforms are also 5x112 but run a 66.5mm hub — these will not fit them. Message us and we'll get you the right bore.
Reference fitment is stock ride height on stock-offset wheels. Lowered cars, aftermarket offsets, or a wider tyre than factory all bring the tyre closer to the liner, and rubbing at full lock or over compression becomes possible. Send us your ride height, wheel size and offset and we'll tell you what will sit flush without catching.
Also fits, but not currently carried as a dedicated collection: Volkswagen Golf MkV 2006-2009, Golf MkVI 2010-2014, Golf MkVII 2015+, Golf R MkVI 2012, Golf R MkVII 2015+, Golf R Mk8 2021+, GTI MkV 2006-2009, GTI MkVI 2010-2014, GTI MkVII 2015+, R32 MkV 2008, Jetta MkV 2005-2010, Jetta MkVI 2011-2017, Jetta MkVII 2019+, Passat B5/B5.5 1998-2005, Passat B6 2006-2010, Passat B7 2012+, CC B7 2009-2015, Eos MkV 2006-2015, Beetle MkVI 2012+, Tiguan I 2009-2011, Tiguan II 2012+. Audi A3 8P 2006-2013, A3 8V 2015+, S3 8V 2015+, RS3 8V 2015-2017, RS3 8V.5 2017+, RS3 8Y 2022+, A4 B6 2002-2005, A4 B7 2005-2008, S4 B5 2000-2002, S4 B6 2003-2005, S4 B7 2005-2008, RS4 B5 2000-2002, RS4 B7 2006-2008, A6 C4 1995-1997, A6 C5 1998-2004, S6 C4 1995-1997, S6 C5 2001-2003, S6 C6 2006-2011, RS6 C5 2003-2004, Allroad C5 2001-2005, A8 D2 1997-2003, A8 D3 2004-2010, S8 D3 2006-2009, S2 B3 1991-1996, Q3 8U 2012+, TT 8J 2008-2015, TT 8S 2016+, TTS 8J 2008-2015, TTS 8S 2016+, TT RS 8J 2012-2013, TT RS 8S 2018+, R8 42/FG 2008-2014. Will not fit the rear of a front-wheel-drive B5 A4. Will not fit 66.5mm bore platforms including B8 and B9 Audi A4/S4/A5/S5/Q5.
Installation
One afternoon, four corners.
Quick install summary
- Measure your wheel's bore chamfer before fitting anything — spacers are non-returnable once installed.
- Wire-brush the hub face and centre pilot until bright, then wipe with brake cleaner.
- Fit the spacer on the hub pilot — 10mm front, 15mm rear.
- Mount the wheel using the longer bolts (37mm front / 42–45mm rear), started by hand.
- Torque to 120 Nm (~89 ft-lb) in a star pattern with the car on the ground.
- Re-torque all four corners after 50–100 miles.
Specs
The details.
Full specifications5x112 · 57.1mm · 6061 billet
| Manufacturer | 034Motorsport |
| Part Numbers | 034-604-7001 (10mm) · 034-604-7002 (15mm) |
| Spacers per Kit | 4 — two 10mm, two 15mm |
| Recommended Layout | 10mm front · 15mm rear |
| Bolt Pattern | 5x112 |
| Hub Bore | 57.1mm |
| Material | 6061 billet aluminium |
| Finish | Black anodized |
| Centring | Hub centric — pilots on the 57.1mm hub |
| Hubcentric Rings | Not compatible |
| Hardware Included | None — 37mm front / 42–45mm rear bolts required |
| Torque Spec | 120 Nm / ~89 ft-lb |
| Modification Required | None |
Fill the arches
034Motorsport Flush
Spacer Kit — 10 & 15mm
Four spacers · 5x112 · 57.1mm bore · Free US shipping over $100
$197.00
034Motorsport Flush Wheel Spacer Kit — 10mm & 15mm | VW & Audi 5x112 (57.1mm)
Customer Reviews
Loading reviews…