MK6 Jetta Votex-Style Rear Bumper Valance
Jetta MK6 · 2011–2014 · Rear Valance · Body Kit
MK6 Jetta
Votex-Style
Rear Valance
FRP Construction · Unpainted Primer · Sedan Only — Does Not Fit GLI
Complete the rear profile of your MK6 Jetta. Modeled after the factory optional aero package, this lower apron wraps the stock rear bumper to kill the plain, tucked-in factory look — dropping the visual bumper line and framing your exhaust tips for a lower, sportier stance.
Arrives unpainted. Hand-laid FRP in a smooth gray/black gelcoat primer, ready for prep and colour-match.
Prep required before paint. Light sanding, edge trimming, and pinhole filling/glazing are standard for FRP body panels. Always dry-fit on the car before sending it out for paint.
Fitment. Sedan only — does not fit GLI models or the 2015–2018 MK6.5 facelift, both of which use a different rear bumper valance.
$285.00Unpainted · Rear valance
Questions? Email us
Hand-laid FRP
Integrated exhaust cutout
Free shipping over $100
Jetta MK6 · 2011–2014 · Rear Valance
MK6 Jetta Votex-Style Rear Valance
Arrives unpainted. FRP in gray/black gelcoat primer, ready for colour-match.
Prep required. Light sanding, edge trimming and pinhole filling before paint. Dry-fit first.
Sedan only — does not fit GLI or 2015–2018 facelift models.
$285.00Unpainted · Rear valance
Questions? Email us
Specs
Key specs & features.
MaterialHand-Laid FRPMolded fiberglass reinforced plastic — rigid, lightweight, holds paint well
FinishGray/Black Gelcoat PrimerUnpainted — needs standard fiberglass prep, filling, primer and colour match
Exhaust CutoutIntegrated Left-SideFrames standard single or dual-tip factory and aftermarket setups
DesignOEM-Inspired VotexContoured lower channels for a subtle diffuser-style look
FitmentJetta Sedan 2011–2014Base, S, SE, SEL and TDI — not GLI, not 2015+
ConditionNew AftermarketWraps the factory rear bumper — no bumper replacement needed
Stock Rear Bumper
Plain, tucked-in lower edge
Higher visual bumper line
Exhaust tips sit unframed
This — Votex-Style Valance
Lowered, down-to-the-ground rear
Diffuser-style contoured channels
Exhaust tips cleanly framed
Fitment
Will it fit?
| Model | Years | Fitment |
|---|---|---|
| VW Jetta Sedan — Base, S, SE, SEL, TDI | 2011–2014 | Direct Fit |
| VW Jetta GLI | All Years | Does Not Fit — Different Valance |
| VW Jetta MK6.5 Facelift | 2015–2018 | Does Not Fit — Revised Bumper |
| VW Jetta SportWagen | All Years | Does Not Fit — Sedan Only |
Install
Installation & prep.
Step 01Test Fit FirstDry-fit the valance on the factory bumper and check alignment around the exhaust cutout and rear wheel wells before sending it to prep or paint
Step 02Prep WorkLight sanding, edge trimming, and pinhole filling/glazing are standard for FRP aftermarket body panels prior to painting
Step 03MountingScrews or rivets through the wheel well lips and under-chassis supports, paired with polyurethane panel bond or 3M VHB along the upper contact seam
Ready to order
MK6 Jetta Votex-Style
Rear Valance
FRP Construction · Unpainted Primer · 2011–2014 Sedan
$285.00
MK6 Jetta Votex-Style Rear Bumper Valance
Customer Reviews
Loading reviews…