MK6 RS3 style spoiler
Jetta/GLI MK6 & MK6.5 · 2011–2018 · Trunk Spoiler · Aero
MK6
RS3-Style
Trunk Spoiler
Low-Profile Duckbill · Carbon Fiber or Gloss Black · 3M Mount
An RS3-inspired duckbill lip for the MK6 Jetta trunk. It adds a sharp, aggressive edge to the back of the car without the bulk of a wing, and finishes the rear off the way a sport sedan should. Choose gloss-coated carbon fiber or gloss black ABS — it mounts with tape, no drilling.
Finish
Jetta/GLI MK6 & MK6.5 · 2011–2018 · Trunk Spoiler
MK6 RS3-Style Trunk Spoiler
Finish
Features
What you're getting.
Overview
A sharper edge for the trunk.
The MK6 Jetta's trunk lid ends in a soft, rounded edge. A low duckbill lip borrowed from the RS3 sedan gives it a clean kick at the back — a small change that does a lot for the car's profile.
Real carbon, gloss coated.
The carbon fiber option has a UV-stable clear coat, so the weave stays deep and doesn't yellow.
Blacked-out option.
Gloss black ABS matches black trim, black roofs and blacked-out badges.
Tape on, no drilling.
Mounts with 1-inch 3M VHB 5952 tape. Nothing is cut or drilled.
Fitment
Will it fit?
For US-market MK6 and MK6.5 Jetta sedans. The trunk lid didn't change with the 2015 facelift, so one spoiler fits both.
By vehicle
VW Jetta — MK62011–2014Direct Fit
Fits the factory trunk lid with no modification.
VW Jetta — MK6.5 facelift2015–2018Direct Fit
Same trunk lid as the MK6.
VW Jetta GLI2012–2018Direct Fit
Same trunk lid as the Jetta. If yours has a factory lip spoiler, it has to come off first.
VW Jetta Hybrid2013–2016Ask Us
The Hybrid's trunk lid differs slightly. Send us your VIN and we'll confirm.
VW Jetta SportWagen / GolfHatch or liftgateDoes Not Fit
No trunk lid. This spoiler is for the Jetta sedan only.
In The BoxWhat's included.
| Item | Supplied |
|---|---|
| RS3-style trunk spoiler (carbon fiber or gloss black) | 1 |
| 1-inch 3M VHB 5952 tape | Not included |
| Adhesion promoter | Not included |
InstallTape-on install.
Test-fit first
Hold the spoiler in place with painter's tape and check the gaps and centering before anything sticks. Mark the position.
Clean the surface
Wash the trunk lid edge, then wipe it and the spoiler's mounting face with isopropyl alcohol. Wax and residue are the main reason tape lets go.
Prime and tape
Wipe adhesion promoter on both surfaces and apply 1-inch 3M VHB 5952 tape to the spoiler. Don't touch the adhesive.
Set it
Peel the backing, line it up with your marks and press firmly along the full length for at least 30 seconds.
Let it cure
Tape reaches full strength over about 72 hours. Install above 60°F if you can, and skip the car wash for a few days.
Professional install recommended for the best alignment.
SpecificationThe details.
Lead time varies on this item — ask us for a current ETA before you order.
FAQQuestions, answered.
Real carbon or a wrap?
The carbon option is real carbon fiber with a gloss clear coat.
What tape do I need?
We recommend 1-inch 3M VHB 5952. It isn't included, so grab a roll before install day.
Does it fit the 2015–2018 facelift?
Yes. The trunk lid is the same from 2011 to 2018.
Will it fit my GLI?
Yes. If your GLI has a factory trunk lip spoiler, it has to come off first.
Will it fit a SportWagen?
No. The SportWagen has a liftgate, not a trunk lid.
How long does shipping take?
This is a sourced item with a longer lead time. Contact us for a current ETA before ordering.
Can I take it off later?
Yes. Warm the tape with a heat gun, slice through it with fishing line and clean off the residue.
What's the return policy?
Uninstalled and in original packaging, returns fall under our standard refund policy. Get in touch before sending anything back.
Ready to upgrade?
MK6 RS3-Style
Trunk Spoiler
Low-Profile Duckbill · Carbon Fiber or Gloss Black · 3M Mount
Warning · Before checkout
You'll need 3M VHB 5952 tape
We recommend 1" 3M VHB 5952 tape to mount this spoiler. It is not included — grab a roll now so you're ready on install day.
Get the tape on Amazon