VW Arteon LED Front Emblem
SHIPS NEXT DAY OR DAY AFTER VIA
VW Arteon · Front Grille · 4th Gen LED Emblem
VW Arteon LED
Front Emblem (4th Gen)
ACC / Radar Safe · Full or Line Illumination
4th generation ultra-slim LED front emblem (≈7mm). Radar transparent — won't trigger ACC/emergency braking errors. Features a startup animation: lights up, flashes three times, stays illuminated. Flat back plate for a cleaner install than older gens.
⚠️ NON-360° CAMERA CARS ONLY — This emblem is for cars WITHOUT the 360° front camera behind the badge. If your Arteon has the 360° camera system, this emblem will NOT fit. Select your model year below.
⚠️ Clips may need to be trimmed and the emblem secured with glue or 3M VHB tape; a small ~6mm hole behind the badge is required to route power wires. Recommended connectors: a Posi-Tap 
or a Dorman 85038 T-Tap 
— both are waterproof and weather sealed.
Emblem Style
or a Dorman 85038 T-Tap — both are waterproof and weather sealed.
$190.00SaleClips may need trimming for install
Questions?
ACC / radar safe
Startup animation
Non-360° camera cars
SHIPS NEXT DAY OR DAY AFTER VIA
VW Arteon · Front Grille · 4th Gen LED
VW Arteon LED Front Emblem
⚠️ NON-360° CAMERA CARS ONLY — For Arteons WITHOUT the 360° front camera behind the badge. Select your model year below.
⚠️ Recommended connectors: a Posi-Tap or a Dorman 85038 T-Tap — both are waterproof and weather sealed.
Emblem Style
or a Dorman 85038 T-Tap — both are waterproof and weather sealed.
$190.00SaleLive price
Questions?
Installation
Wiring the emblem.
Wiring in the emblem is straightforward — no need to cut into the factory harness.
- Locate the headlight/DRL harness behind the grille on the side you're installing.
- Identify the DRL+ (daytime running light positive) wire — this is what powers the emblem.
- Clamp a Posi-Tap or Dorman 85038 T-Tap connector onto the DRL+ wire and route the emblem's red lead into the open side — both are waterproof and weather sealed, unlike standard Scotch-Lock taps.
- Crimp the tap closed, then run the black lead to a clean chassis ground point.
- Test before final reassembly — it should light up, flash three times, then hold steady with your DRLs/headlights.
⚠️ Verify polarity with a multimeter before tapping in. And remember: this emblem is for NON-360° front camera Arteons only.
Features
What you're getting.
Generation4th Gen · Ultra-Slim≈7mm profile — cleaner install than older generations
ACC SafeRadar TransparentWon't block ACC or trigger ADAS errors
AnimationFlash & HoldLights up, flashes 3x, stays on with DRL/headlights
WiringDIY · Posi-Tap InstallTaps the DRL+ wire — no cutting into the factory harness
FitmentSelect Your YearNON-360° front camera cars only — see fitment table below
InstallGlue or 3M VHBClips may need trimming; secure with adhesive during install
Fitment
Will it fit?
| Model | Years | Fitment |
|---|---|---|
| VW Arteon (no 360° front camera) | 2017–2020 | Direct Fit |
| VW Arteon (no 360° front camera) | 2022–2024 | Direct Fit |
| VW Arteon with 360° front camera | — | Does NOT Fit |
Ready to upgrade?
VW Arteon LED Front Emblem
(4th Gen)
4th Gen · ACC Safe · Radar Transparent · Non-360° Camera Cars
From$190.00
VW Arteon LED Front Emblem
Customer Reviews
Loading reviews…